Message Forums

It was working fine thenjust stopped. There is no red master key its direct to battery which is fully charged and working everything else.

I am stuck as I cant move the caravan without it as its in a narrow gap on a hill

Where abouts in the UK are you , maybe someone could help you if they live close.

atb

Wizard

That's a bit too far for me , send me a email ( address below ) i'll try and come up with a few idea's for you , things you can check and email them to you .
If you can email me , some pictures of your control box ( showing wiring ) , some of your battery connections and a picture of each motor showing connections ( wires ) .

atb

Wizard

Hi

I had my Enduro throw a bit of a brain f#+t. I had to reset the box (small black button on rear) let the light flash quickly press the reset again then the red on button on the remote and away it went, had to do it twice now but still really impressed with it.

Homestead did tell me that the control box didn't like trying to work while hook-up was connected so I fitted the battery isolator switch so it could work while the hook-up/ charger was on.

Hope this helps.

Trev.

Oh ok, thanks, there are no lights on the control box at all, I have tried the reset and have now been sent a new box but nothing, so a new box and remote and am still stuck

Lou

Lou

Have you got 12v feed to the mover control box? Is the battery FULLY charged?

Make sure you have good connection at the battery you say you have no isolator so the next connections are on the control box I think it's terminals 1 and 2, They are marked 12v pos and neg (+ and -).

if you have power there press the reset and hold for a few seconds till the lights flash then press again then operate the handset. 

Thats all I had to do to mine it was fine after that.

good luck

Trev.