Joined: 01/11/2005 Diamond Member
Forum Posts: 2189
Site Reviews Total: | 6 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 1 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 1 |
|
The size of the rafter* poles vary with the size of the awning, the larger [ from your info the 30.5] being used in the larger size awnings which would IMO include yours.
The rafters being telescopic with the next size tube down being used in the forward section. My old 1991 825 CM used the 26/23 size my later 2002 1000CM uses 30.5/26.
*Rafter= roof, the van to front stretcher poles.
The vertical legs use a 26mm top tube with an internal 23 mm telescopic inner lower tube.[Again based on your info].
The Gables both for the main frame and canopy, and the short canopy stand-outs again use the two telescopic 26 and 23 mm tubes.
Note I have had to assume the sizes you quote are the only options as I have not measured mine but know there are three sizes.
Post last edited on 09/08/2011 07:06:44
Post last edited on 09/08/2011 07:07:15
|