Joined: 30/6/2002 Diamond Member 
Forum Posts: 23517
| Site Reviews Total: | 1 |
|
| Site Reviews 2025: | 0 |
| Site Reviews 2024: | 0 |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 0 |
| Site Reviews 2021: | 0 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 0 |
|
| Site Nights 2025: | 0 |
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 0 |
| Site Nights 2021: | 0 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 0 |
|
Quote: Originally posted by quillie on 23/4/2013
Thanks ill look out for that, can i fit this non return valve anywere ?
you need to remove the old one from the cold water inlet and replace in the same place.i would think this is part of the design.old email from truma.
TRUMA
Park Lane, Dove Valley
Park
Foston, Derbyshire,
DE65 5BG
Truma Service/Technical
01283 586020
Lines open 8.30am -
5.00pm Mon - Thur, 8.30am - 1.30pm Fri
Dear Sir
The non return valve would be located somewhere on the cold feed
to the boiler, the water sounds as if it is backfeeding into the aquaroll and
the non return valve will need replacing.
Kind Regards
-------------
the only silly question is the one you do not ask.
|
Topic: advise needed fresh water draining back
