Good evening people, I have recently purchased a 1986 model of the conway cruiser and we have got an awning with it however no groundsheet and I want to buy one before we go away in it but don't have anywhere to put it up to measure it, I have tried searching on Google but to no joy.
Can anyone help with the measurements so I can buy one please. On the tag of the awning it says ENT Auvent cruiser of 118 if this helps? Thanks in advance guys
I believe a Conway Cruiser is a folding camper so you may be wise to ask under the 'Trailer Tents and Folding Campers' section as someone may just have one.
The awning width will be the same length as the camper body (excluding the front and rear panels) and the depth would be about the same width as the camper itself (from the door to the opposite side). If you go by these measurements you won't be far out.
Try this link and follow the awning size chart for the Cruiser. Hope this helps
You will more than likely have to buy it off the roll some dealers sell it that way or buy the nearest size available thats ready made Kampa do them
Hi. You can also have smaller porch awnings adapted to your camper. We have just recently sold our second folding camper. We would use the adapted porch awning most of the time weekends and short trips longer trips we would use the full awning it entails having a zip fitted to a caravan porch awning so that it can be zipped onto the camper. You will get guidance for this in the Trailer Tents,Folding camper section.