Well I'm back on again and my problems with my water is still on going.
if you have read my previous posts Iin the end I purchased a new Whale FP. 0814 pump and whilst I had a water flow it certainly wasn't as good as the old uv model. I have tried everything all to no avail. The last time I was concerned it was my O rings on the outside connector , unfortunately the local dealer did not have any in stock. I actually found some in the garage although a little more dumpy I tried them and yes they seemed to do the trick, but they made it very difficult to pull the connector off. Today I have got the correct ones but after fitting I could hear air hissing around the connector, again almost No Flow. I then turned to the onboard tank ( by passing the connector) and yes it does appear my problem is with the O rings or the actual connector itself. In saying all this I find the new pump very noisy in comparison to the old one and down on flo rate. Has anyone fitted one and if so what's there opinion. Perhaps you could let me know .
Hi Romatone
Two years on I have read your post and I have exactly the same problem on my 2008 Eldiss Crusader - tried with all the air locks,checked for empty water but pump still buzzes away but drawing no water into van - please could you tell me in very simple terms how you rectified yours - thankyou very much for your reply.......Adam.
Discounted Insurance Quotes for UKCampsite.co.uk visitors! Up to 12.5% off!
Had this problem a few years ago, pump running but no water entering van. Not sure whether you've tried this or not, but we disconnected from van & swung the pump end round in the air several times ( quite violently), before putting pump back into Aquaroll & then reconnecting to van. Think our airlock was in the pump itself. It's worked fine ever since.
Hope this may help & good luck.