Message Forums

I suppose so as long as the ball is 50mm

But it will fit on any 50mm ball.

A ALKO Stabiliser. needs the following clearance of  towball and towing vehicle?

This varies according the the stabiliser.

AKS 1300 = 65mm
AKS 2004 = 67mm
AKS 2007 = 60mm
AKS 3004 = 68mm

This measurement is taken from the centre of the towball to the nearest point of contact with the towing vehicle.

Insufficient clearance will prevent the stabiliser from correct articulation and could damage your car or possibly become detached.

So as long as you follow the above any tow ball will be ok even a standard one.

But you are better with a swan neck as stated above.

But the distances above still apply to the swan neck as well.

Sorry i was thinking Winterhoff. Which can be used on both.

I have a pin and ball and works fine on that

Oooooooooo

Just checked ball and pin, and guess what it's clearance is the same as a standard ball , ball to below Ummmmmm

Seems i need a seperate tow ball just for the caravan from day to day duties then.

Take a look at this http://www.maxxraxx.co.uk/Guides/ALKO_Towball_Guide.pdf