I have a 2009 Bailey Pageant S 7 Monarch, fitted with a Thetford toilet.
Last time out in July no problems, system tank drained out at end of holiday. This time out in October, after filling up, the unit would not flush. I have checked spade fuse (purple 3amp) in the waste cassette locker.
Any ideas before I attemp to replace pump.
That will be another posting, enquiringly how to get at it?
The only thing I have done between outings, was to replace the lip seal on the waste cassette, I don’t think this should have effected the flush side, but have mentioned it, just in case.
Thanks Ray M
Check the pcb board on the top of the toilet, it’s under the flush button overlay. Make sure you have 12v getting to it on the red and black cables then when the button is pressed you should have 12v leaving the board on the brown and blue wires which go to the pump. Also check the plug and the board for corrosion.
Discounted Insurance Quotes for UKCampsite.co.uk visitors! Up to 12.5% off!
Hi Sevenexile, Thanks for your prompt reply. How easy is it to access the flush button overlay, looking at top of toilet no screws, do I have to lever the pad with the button on up.
Ray M
Yeah sorry should of said, the overlay is stuck down if you peel the bottom middle up slightly, you will see a notch where you can get a small flat head screw driver into lever and pop it up.