Joined: 15/5/2008 Diamond Member 
Forum Posts: 9587
| Site Reviews Total: | 23 |
|
| Site Reviews 2024: | 0  |
| Site Reviews 2023: | 0 |
| Site Reviews 2022: | 3  |
| Site Reviews 2021: | 1 |
| Site Reviews 2020: | 0 |
| Site Reviews 2019: | 4 |
| Site Reviews 2018: | 0 |
|
| Site Nights 2024: | 0 |
| Site Nights 2023: | 0 |
| Site Nights 2022: | 11 |
| Site Nights 2021: | 3 |
| Site Nights 2020: | 0 |
| Site Nights 2019: | 24 |
| Site Nights 2018: | 0 |
|
I think the shower door just has a self adhesive waterproof draught excluder strip around the perimeter. Just peel off the old seal, clean off with some white spirit to remove any old sticky adhesive then make sure you clean any remaining white spirit off with polish otherwise the new strip won't stick. Unroll the new strip, attach to the existing surround then cut to length as required. The roll can be found in the link below for under a couple of quid.
Here
|
Topic: Lunar shower door sealing strip
via mobile 26/8/2019 at 12:26pm
