Problem solved.
For all the fellow mh'ers who find their Alde control panel blank and who are told they need a new PCB board (at a cost of £280)! Please read this thread and the cost of repair will be considerably less at £0.59p!
Last week whilst in Italy I woke up to find my control panel blank and no sign of life at all. If you google this problem many people are told to first check the 2 glass 20mm fuses which are under the inspection cover at the top of your boiler (F1 and F3) which are 3.15amp. They are in little green fuse holders. Most of the time you will find these fuses are perfect and not blown and you will be told you need a new PCB. NOT THE CASE.
More likely it will be fuse F2 (a 90 degree non resettable thermal fuse) which in Alde great wisdom decided to solder onto the PCB and not make it resettable. This fuse is directly below the right hand side glass fuse. Thermal fuses degrade over time so you will most likely come across this problem if your boiler is a few years old and a good income stream for Alde.
------------- everything will be O.K. in the end, if it's not O.K. then it's not the end.
Discounted Insurance Quotes for UKCampsite.co.uk visitors! Up to 12.5% off!