Joined: 15/8/2009 Standard Member
Forum Posts: 3
Site Reviews Total: | 0 |
|
Site Reviews 2024: | 0 |
Site Reviews 2023: | 0 |
Site Reviews 2022: | 0 |
Site Reviews 2021: | 0 |
Site Reviews 2020: | 0 |
Site Reviews 2019: | 0 |
Site Reviews 2018: | 0 |
|
Site Nights 2024: | 0 |
Site Nights 2023: | 0 |
Site Nights 2022: | 0 |
Site Nights 2021: | 0 |
Site Nights 2020: | 0 |
Site Nights 2019: | 0 |
Site Nights 2018: | 0 |
|
OK, so I too have a problem where the tombstones are either broken or have simply come off of the door(s) - I have 2 sliding doors that share a common track so they are linked to it via tomstones in alternate order (i.e. left slider door 1, left slider door 2, right slider door 1, right slider door 2).
I have the parts but the I have 2 problems:
a) How do I get the sliders into the track. Do they just pop in? Do I need to be able to access the track from one (open) end?
b) I cannot easily get to the top of the doors to attach the tombstones with screws as the track is flanked on both sides with a trim that extends about 5cm down from the ceiling. To remove this trim is probably not an option. Depending on the answer to (a) above, perhaps I just need to get the doors off; attach the tombstones and then pop in the tombstones with doors attached.
Any guidance from other members who have done this would be very gratefully appreciated.
Cheers,
Dave
|